|Typical Use:||Used for bonding rubbers, plastics and metals; suitable for applications where heat resistance is required.|
|Chemical Composition:||Ethyl cyanoacrylate|
|Cure Time:||Up to 24h depending on the substrate used, the bondline gap, and the relative humidity.|
|Dielectric Strength:||25 kV/mm|
|Flash Point:||80 to 93.3 °C|
|Specific Gravity:||1.05 @ 23.89 °C|
|Tensile Strength:||1,740 to 3,625 psi|
|Thermal Conductivity:||0.1 W/mK|
|Viscosity:||4,000 to 8,000 @ 25 °C|
|Volume Resistivity:||10 x 10^15 ohm-cm|
Cyanoacrylate water white/slightly cloudy adhesive for general purpose and gap-filling applications. Suitable for rubbers, plastics, and metals.
LOCTITE® 411 is a water white to slight cloudy, high-viscosity, ethyl cyanoacrylate adhesive gel. This general purpose, gap-filling instant adhesive is suitable for bonding rubbers, plastics, and metals. It exhibits excellent peel strength and added-heat resistance. Fixture time occurs in seconds, with full cure achieved in 24 hr at normal room humidity.